Oil Pump: Assembly

Install O-ring to oil pump cover.
CAUTION:
- Do not reuse O-ring.
- Apply ATF to O-ring.
  
  Fig 1: Identifying O-Ring For Oil Pump Cover
Install O-ring to oil pump housing.
CAUTION:
- Do not reuse O-ring.
- Apply ATF to O-ring.
  
  Fig 2: Identifying O-Ring
Using the drift, install oil pump housing oil seal to the oil pump housing until it is flush.
CAUTION:
- Do not reuse oil seal.
- Apply ATF to oil seal.
  
  Fig 3: Identifying Oil Pump Housing And Oil Seal
Install oil pump housing to oil pump cover.
Tighten bolts to the specified torque in numerical order shown in the figure after temporarily tightening them. Refer to "COMPONENTS ".

Fig 4: Identifying Tightening Sequence Of Bolts