Total End Play

Measure clearance between front sun gear and bearing race for oil pump cover.
Select proper thickness of bearing race so that end play is within specifications.

Fig 1: Measuring Total End Play

Measure dimensions "K" and "L" and then calculate dimension "J".

Fig 2: Identifying Dimensions For Front Sun Gear And Transmission Case
1. Measure dimension "K".
  
  Fig 3: Identifying Front Sun Gear And Transmission Case
2. Measure dimension "L".
3. Calculate dimension "J".
  "J": Distance between oil pump fitting surface of transmission case and needle bearing mating surface of front sun gear .
  
  J = K - L
  
  Fig 4: Identifying Distance Between Oil Pump Fitting Surface Of Transmission Case
Measure dimensions "M1" and "M2" and then calculate dimension "M".

Fig 5: Identifying Distance Between Oil Pump Fitting Surface Of Transmission Case
1. Place bearing race and needle bearing on oil pump assembly.
  
  Fig 6: Placing Bearing Race And Needle Bearing On Oil Pump Assembly
2. Measure dimension "M1".
  
  Fig 7: Identifying Dimension "M1"
3. Measure dimension "M2".
  
  Fig 8: Identifying Dimension "M2"
4. Calculate dimension "M".
  "M": Distance between transmission case fitting surface of oil pump and needle bearing on oil pump .
  
  M = M1 - M2
  
  Fig 9: Identifying Distance Between Oil Pump Fitting Surface Of Transmission Case
Adjust total end play "T1".
T1 = J - M

Total end play "T1": 0.25 - 0.55 mm (0.0098 - 0.0217 in)
- Select proper thickness of bearing race so that total end play is within specifications.
  Bearing races: Refer to "BEARING RACE FOR ADJUSTING TOTAL END PLAY ".
  
  Fig 10: Measuring Total End Play