LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Steering Column >> Removal and Installation >> Removal Of Steering Column Assembly

Removal Of Steering Column Assembly

  1. Set vehicle to the straight-ahead position.
  2. Remove driver air bag module. Refer to "DRIVER AIR BAG MODULE ".
  3. Remove steering wheel. Refer to "REMOVAL AND INSTALLATION ".
  4. Remove steering column cover. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  5. Remove combination switch & spiral cable. Refer to "SPIRAL CABLE ".
  6. Remove instrument driver lower panel. Refer to "INSTRUMENT PANEL ASSEMBLY ".
  7. Remove fixing bolts of knee protector (1), then remove knee protector (1) from vehicle.
  8. Remove low tire pressure warning control unit. Refer to "LOW TIRE PRESSURE WARNING CONTROL UNIT ".
  9. Disconnect each switch connectors installed to steering column assembly, and then disconnect harness from steering column assembly.
    Fig 1: Identifying Knee Protector
    G04887326
  10. Remove fixing bolt of upper joint (1) (steering column assembly side).
  11. Remove steering column assembly mounting bolts and nut, then remove steering column assembly from vehicle.
    Fig 2: Identifying Fixing Bolt On Upper Joint
    G04887325
scientia non olet · About LEMON Manuals