LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> Body & Frame >> Windows >> Glass, Window System & Mirrors >> Door Mirror >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

  1. Place the mirror body with mirror glass facing upward.
  2. Put a strip of protective tape B on mirror body.
  3. As shown in the figure, insert a small slotted screwdriver A into the recess between mirror base (mirror holder)(1) and mirror holder bracket (2) and push up two pawls (3) to remove mirror holder lower half side.
    NOTE: When pushing up pawls do not attempt to use one recess only, be sure to push up with both recesses.

    Insert screwdriver into recesses, and push up while rotating (twist) to make work easier.

  4. Remove two terminals of mirror heater attachment.
    Fig 1: Inserting Screwdriver Between Mirror Base (Mirror Holder) And Mirror Holder Bracket
    G04877456
  5. Lightly lift up lower side of mirror surface from mirror surface, and detach two pawls of upper side as if pulling it out. Remove mirror surface from mirror body.
    NOTE: Be certain not to allow grease on sealing agent in center of mirror body assembly (actuator) or back side of mirror surface (mirror holder).
  6. Remove the clips and mirror cover from the housing.
    Fig 2: Identifying Clips And Mirror Cover Housing
    G05212729
  7. Remove the screws and power unit from the housing.
    Fig 3: Locating Power Unit From Housing And Screw
    G05212730
scientia non olet · About LEMON Manuals