LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> M35 Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Driver Information System >> Combination Meters >> Engine Speed Signal Inspection

Engine Speed Signal Inspection

Symptom: Tachometer indication is malfunction.

  1. CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL 
    1. Start engine and select "METER A/C AMP" on CONSULT-II.
    2. Using "TACHO METER" on "DATA MONITOR", compare the value of "DATA MONITOR" to that of tachometer of combination meter.

    Is the value in tachometer almost same as the value in the monitor? 

    OK: GO TO 2.

    NG: Replace combination meter. (Perform self-diagnosis of ECM when the value in the monitor indicates 8191.875 rpm. Then repair or replace the malfunction part.)

    Fig 1: CONSULT-II Display - Data Monitor
    G04908702
  2. CHECK ECM OUTPUT SIGNAL 
    1. Select "ENGINE" on CONSULT-II.
    2. Using "ENG SPEED" on "DATA MONITOR", print out the CONSULT-II screen when the engine is idling.
    3. Select "METER A/C AMP" on CONSULT-II.
    4. Using "TACHO METER" on "DATA MONITOR", compare the value of "DATA MONITOR" of the idling speed to that of the "ENG SPEED".

    OK or NG 

    OK: Perform self-diagnosis of ECM. Refer to "CONSULT-II FUNCTION (ENGINE) " (for VQ35DE) or "CONSULT-II FUNCTION (ENGINE) " (for VK45DE).

    NG: Replace unified meter and A/C amp.

    Fig 2: CONSULT-II DATA MONITOR Screen
    G04922962
scientia non olet · About LEMON Manuals