CONSULT-II Functions (Multi AV): Notes

CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.

Diagnosis mode	Description
SELF DIAG RESULTS	Performs the connection diagnosis of communication circuit between AV (NAVI) control unit and system and displays the current and past malfunctions collectively. The DVD-ROM drive diagnosis of NAVI control unit and the connection diagnosis between NAVI control unit and GPS antenna can be performed (DVD-ROM drive will not be diagnosed when no map DVD-ROM is in it)
DATA MONITOR	The diagnosis of vehicle signal that input to the AV (NAVI) control unit can be performed
CAN DIAG SUPPORT MNTR	The transmitting/receiving of CAN communication can be monitored. Refer to "CAN DIAGNOSTIC SUPPORT MONITOR ".
AV COMM MONITOR	The transmitting/receiving of a system can be monitored
ECU PART NUMBER	The part number of AV (NAVI) control unit can be checked