LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Brake Control System) >> Trouble Diagnosis >> Data Monitor >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2007 Infiniti FX45 and 2007 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. After turning ignition switch OFF, perform "CONSULT-II Start Procedure". Refer to "CONSULT-II START PROCEDURE ".
  2. Turn ignition switch ON.
  3. Touch "ABS", "DATA MONITOR" in order on the CONSULT-II screen.
    CAUTION: When "START (NISSAN BASED VHCL)" is touched immediately after starting engine or turning on ignition switch, "ABS" might not be displayed in the "SELECT SYSTEM" screen. In this case, repeat the operation from step  1.
  4. Return to the Monitor Item Selection screen, and touch "ECU INPUT SIGNALS", "MAIN SIGNALS" or "SELECTION FROM MENU". Refer to the following information.
  5. When "START" is touched, the data monitor screen is displayed.
scientia non olet · About LEMON Manuals