Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK KEY SLOT POWER SUPPLY CIRCUIT
- Turn ignition switch OFF.
- Disconnect key slot connector.
- Check voltage between slot connector and ground.TERMINALS VOLTAGE REFERENCE
Key slot Ground Voltage (V) (Approx.) Connector Terminal M22 1 Ground Battery voltage 5
Is the inspection result normal?
YES: GO TO 2.
NO: Repair or replace key slot power supply circuit.
- CHECK KEY SLOT GROUND CIRCUIT
Check continuity between key slot connector and ground.
TERMINALS CONTINUITY REFERENCEKey slot Ground Continuity Connector Terminal M22 7 Ground Existed Is the inspection result normal?
YES: GO TO 3.
NO: Repair or replace key slot ground circuit.
- CHECK INTERMITTENT INCIDENT
Refer to "INTERMITTENT INCIDENT ".
INSPECTION END.