LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2007 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Security Control System (Sedan)) >> Intelligent Key System >> Component Diagnosis >> DTC B2601: Shift Position >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. CHECK A/T DEVICE (DETENTION SWITCH)
    1. Turn ignition switch OFF.
    2. Disconnect A/T device (detention switch) harness connector.
    3. Check continuity between A/T device (detention switch) terminals as follows.
      TERMINALS CONTINUITY REFERENCE

      A/T device (detention switch) Condition Continuity
      Connector Terminal
      M137 10 11 A/T selector lever P position Not existed
      Other than above Existed

    Is the inspection result normal? 

    YES: INSPECTION END

    NO: Replace A/T device. Refer to "2WD : REMOVAL AND INSTALLATION "(2WD models) "AWD : REMOVAL AND INSTALLATION "(AWD models)

scientia non olet · About LEMON Manuals