Operation Procedure

Touch "DTC WORK SUPPORT" on "SELECT DIAG MODE" screen.

Fig 1: Identifying CONSULT II - Screen Display - DATA MONITOR And ACTIVE TEST
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch select item menu.

Fig 2: Identifying CONSULT-II Display - Select Item Menu
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".

Fig 3: Identifying CONSULT-II Display - TCC SOL FUNCTION CHECK
Courtesy of NISSAN MOTOR CO., U.S.A.
Perform driving test according to "DTC Confirmation Procedure" in "TROUBLE DIAGNOSIS FOR DTC".

Fig 4: Identifying CONSULT-II Display - DTC CONFIRMATION PROCEDURE
Courtesy of NISSAN MOTOR CO., U.S.A.
- When testing conditions are satisfied, CONSULT-II screen changes from "OUT OF CONDITION" to "TESTING".
Fig 5: Identifying CONSULT-II Display - OUT OF CONDITION
Courtesy of NISSAN MOTOR CO., U.S.A.
Stop vehicle.

Fig 6: Identifying CONSULT-II Display - STOP VEHICLE
Courtesy of NISSAN MOTOR CO., U.S.A.
- If "NG" appears on the screen, malfunction may exit. Go to " DIAGNOSTIC PROCEDURE "
Fig 7: Identifying CONSULT-II Display - NG
Courtesy of NISSAN MOTOR CO., U.S.A.
Perform test drive to check gear shift feeling in accordance with instructions displayed.

Fig 8: Identifying CONSULT-II Display - TCC SOL FUNCTION CHECK

Courtesy of NISSAN MOTOR CO., U.S.A.

Touch "YES" or "NO".
CONSULT-II procedure is ended.
- If "NG" appears on the screen, a malfunction may exit. Go to " DIAGNOSTIC PROCEDURE "
Fig 9: Identifying CONSULT-II Display - NG
Courtesy of NISSAN MOTOR CO., U.S.A.