Lighting Switch Signal Inspection

CHECK BCM INPUT SIGNAL
1. Select "BCM" on CONSULT-II.
2. With "DATA MONITOR" of "BUZZER", confirm "LIGHT SW 1ST" when the lighting switch is operated.
  "LIGHT SW 1ST"
  
  Lighting switch ON (1st position) : ON
  
  Lighting switch OFF : OFF
  
  Fig 1: Identifying CONSULT-II Display - DATA MONITOR
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG

OK: INSPECTION END

NG: Check the lighting switch. Refer to "COMBINATION SWITCH INSPECTION ".