Special Service Tools

The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here.

SPECIAL SERVICE TOOLS CHART

Tool number (Kent-Moore No.) Tool name		Description
KV40104000 ( - ) Flange wrench		Removing self-lock nut Installing self-lock nut a: 85 mm (3.35 in) b: 65 mm (2.56 in)
KV381054S0 (J-34286) Puller		Removing front oil seal Removing rear oil seal Removing metal bushing
KV38100500 ( - ) Drift		Installing front oil seal a: 80 mm (3.15 in) dia. b: 60 mm (2.36 in) dia.
ST30720000 (J-25405) Drift		Installing rear oil seal Installing mainshaft front bearing and oil seal a: 77 mm (3.03 in) dia. b: 55.5 mm (2.185 in) dia.
KV40105310 ( - ) Drift		Installing dust cover a: 89 mm (3.50 in) dia. b: 80.7 mm (3.17 in) dia.
ST22360002 (J-25679-01) Drift		Installing side oil seal a: 23 mm (0.91 in) dia. b: 32 mm (1.26 in) dia.
ST35300000 ( - ) Drift		Removing sun gear assembly and planetary carrier assembly Removing carrier bearing Installing metal bushing a: 59 mm (2.32 in) dia. b: 45 mm (1.77 in) dia.
ST33200000 (J-26082) Drift		Removing mainshaft front bearing Installing sun gear assembly and planetary carrier assembly Installing mainshaft front bearing and oil seal a: 74.5 mm (2.933 in) dia. b: 62.5 mm (2.461 in) dia.
ST30031000 ( - ) Puller		Removing carrier bearing Removing front drive shaft front bearing Removing front drive shaft rear bearing a: 90 mm (3.54 in) dia. b: 50 mm (1.97 in) dia.
ST33710000 ( - ) Drift		Removing needle bearing Removing metal bushing a: 24 mm (0.94 in) dia. b: 89 mm (3.5 in) c: 30 mm (1.18 in) dia.
ST35325000 ( - ) Drift bar		Removing metal bushing a: 215 mm (8.46 in) b: 25 mm (0.98 in) dia. c: M12 x 1.5P
ST33052000 ( - ) Adapter		Removing front drive shaft front bearing Removing front drive shaft rear bearing Installing mainshaft a: 28 mm (1.10 in) dia. b: 22 mm (0.87 in) dia.
ST22452000 (J-34335) Drift		Removing press flange snap ring Installing press flange snap ring a: 45 mm (1.77 in) dia. b: 36 mm (1.42 in) dia. c: 400 mm (15.76 in) dia.
ST30911000 ( - ) Puller		Removing press flange snap ring Installing press flange snap ring Installing mainshaft Installing carrier bearing a: 98 mm (3.86 in) dia. b: 40.5 mm (1.594 in) dia.
KV31103300 ( - ) Drift		Removing press flange snap ring Installing press flange snap ring Installing carrier bearing a: 76.3 mm (3.004 in) dia. b: 130 mm (5.12 in)
KV38100300 (J-25523) Drift		Removing mainshaft rear bearing a: 54 mm (2.13 in) dia. b: 46 mm (1.81 in) dia. c: 32 mm (1.26 in) dia.
ST15310000 (J-25640-B) Drift		Installing mainshaft rear bearing a: 96 mm (3.78 in) dia. b: 84 mm (3.31 in) dia.
KV40100621 (J-25273) Drift		Installing front drive shaft front bearing Installing front drive shaft rear bearing a: 76 mm (2.99 in) dia. b: 69 mm (2.72 in) dia.
ST30032000 (J-26010-01) Base		Installing front drive shaft front bearing Installing front drive shaft rear bearing a: 38 mm (1.50 in) dia. b: 80 mm (3.15 in) dia.
ST33220000 ( - ) Drift		Installing needle bearing a: 37 mm (1.46 in) dia. b: 31 mm (1.22 in) dia. b: 22 mm (0.87 in) dia.