Stop Lamp Switch

Disconnect stop lamp switch harness connector.

Fig 1: Locating ASCD Brake Switch And Stop Lamp Switch
Courtesy of NISSAN MOTOR CO., U.S.A.

Check continuity between stop lamp switch terminals 3 and 4 under the following conditions.

STOP LAMP SWITCH CONTINUITY

Conditions	Continuity
Brake pedal: Fully released	Should not exist.
Brake pedal: Slightly depressed	Should exist.

If NG, adjust stop lamp switch installation, Refer to "BRAKE PEDAL ", and perform step 2 again.

Fig 2: Identifying Stop Lamp Switch Continuity
Courtesy of NISSAN MOTOR CO., U.S.A.