LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> Q45 >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering Control System >> With Rear Active Steer >> Rear Active Steer System >> System Diagram >> Components Function Description

Components Function Description

COMPONENT FUNCTION DESCRIPTION TABLE

Component parts Function
RAS control unit Controls power steering solenoid valve and RAS actuator assembly (with fail-safe function).
Power steering solenoid valve Controls oil pressure in gear housing assembly.
RAS actuator assembly Moves the rear wheel angle.
Rear wheel steering angle sensor Transmits RAS actuator assembly condition to RAS control unit.
RAS motor Operates RAS actuator assembly.
RAS warning lamp Illuminates if malfunction is detected in electrical system of rear active steer system.
Stop lamp switch Detects status of brake pedal depressed.
Steering angle sensor Transmits steering angle sensor signal via CAN communication to RAS control unit.
ECM Transmits engine speed signal via CAN communication to RAS control unit.
VDC/TCS/ABS control unit Transmits the following signals via CAN communication to RAS control unit.
  • Vehicle speed signal
  • VDC malfunction signal