LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> Q45 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Q45 - DTC P1211 Through P2A03 >> DTC P1572 ASCD Brake Switch >> DTC Confirmation Procedure >> Testing Condition: >> With Consult-II

With Consult-II

  1. Start engine (VDC switch OFF).
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Press MAIN switch and make sure that CRUISE lamp lights up.
  4. Drive the vehicle for at least 5 consecutive seconds under the following conditions.
    VHCL SPEED SPECIFICATIONS

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    Fig 1: CONSULT-II Display - Data Monitor
    G04127681Courtesy of NISSAN MOTOR CO., U.S.A.

    If 1st trip DTC is not detected, go to the following step.

  5. Drive the vehicle for at least 5 consecutive seconds under the following conditions.
    VHCL SPEED SPECIFICATIONS

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position
    Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned vehicle speed.
  6. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals