Automatic Operation

AUTOMATIC OPERATION

Function		Description
Memory switch operation		The seat, steering wheel and door mirror move to the stored driving position by pushing memory switch.
Entry / Exiting function	Return operation	At entry, the seat and steering wheel return from the exiting position to the previous driving position.
Entry / Exiting function	Turnout operation	At exit, the seat moves backward, and the steering wheel moves forward and upward.

NOTE:

Disconnecting the battery erases the stored memory.
After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open)-->OFF (close)-->ON (open), the Entry / exiting function becomes possible.

AUTOMATIC OPERATION

Auto operation stop conditions.

When the vehicle speed becomes 7 km/h (4 MPH) or higher.
When the manual switch is operated.
When any two or more switches among the setting switch, memory switch 1, or 2 are pressed simultaneously.
When the tilt sensor or telescoping sensor malfunction is detected.
When the A/T selector lever is shifted to a position other than P-position.

NOTE: During automatic operation, if the ignition switch is turned ON-->START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.