Work Flow
- Check the symptom and customer's requests.
- Understand the outline of system. Refer to
, "SYSTEM DESCRIPTION ".
- Perform the preliminary check. Refer to
, "PRELIMINARY CHECK ".
- Perform the communication inspection. If CONSULT-II is used, refer to
, "IVMS COMMUNICATION INSPECTION ". If CONSULT-II is not used, refer to
, "COMMUNICATION DIAGNOSIS ". Is the communication diagnosis result OK?
- OK: GO TO step 7.
- NG: GO TO step 5.
- Repair or replace depending on the diagnosis result.
- Perform the communication diagnosis again. If CONSULT-II is used, refer to
, "IVMS COMMUNICATION INSPECTION ". If CONSULT-II is not used, refer to
, "COMMUNICATION DIAGNOSIS ". Is communication diagnosis result OK?
- OK: GO TO step 7.
- NG: GO TO step 5.
- Referring to Trouble diagnosis chart, repair or replace the cause of the incident. Refer to
, "TROUBLE DIAGNOSIS CHART BY SYMPTOM ".
- Does the remote keyless entry system operate normally?
- YES: GO TO step 9.
- NO: GO TO step 7.
- Inspection end.