LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> M45 >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Transfer Case) >> Transfer Fluid >> Replacement >> Filling

Transfer Fluid: Replacement: Filling

WARNING: This page is about a different car, the 2006 Infiniti QX56. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the filler plug and gasket.
  2. Fill with new specified fluid until the fluid level reaches the specified limit near the filler plug hole as shown.

    Fluid capacity and grade : Refer to " FLUIDS AND LUBRICANTS  "  .

    Fig 1: Identifying Filler Plug
    G04133919Courtesy of NISSAN MOTOR CO., U.S.A.
    CAUTION: Carefully fill the transfer with fluid. Filling should take approximately three minutes.
  3. Leave the vehicle for three minutes and then check the fluid level again as shown.
  4. Install the new gasket on the filler plug and install the filler plug in the transfer. Tighten the filler plug to specification.

    Filler plug : Refer to " COMPONENTS  "  .

    CAUTION: Do not reuse the gasket.
scientia non olet · About LEMON Manuals