System Description: Initialization

Perform the initialization when the following operations are performed or when the auto up operation is not performed. Refer to INITIALIZATION  (Front door), INITIALIZATION  (Rear door).

• When the power supply to the power window main switch, power window sub-switch or each power window motor is cut off by the removal of battery terminal or the battery fuse is blown.
• Disconnection and connection of power window main switch or each power window sub-switch harness connector.
• Removal and installation of regulator assembly.
• Removal and installation of motor from regulator assembly.
• Operation of regulator assembly as an independent unit.
• Removal and installation of glass.
• Removal and installation of door glass run.
  CAUTION: The following operations are not performed under the condition that the initialization is not performed yet.
• Auto up operation
• Anti-pinch function
• Key cylinder switch close operation