Total End Play

Measure clearance between front sun gear and bearing race for oil pump cover.
Select proper thickness of bearing race so that end play is within specifications.

Fig 1: Measuring Clearance Between Front Sun Gear And Bearing Race For Oil Pump Cover

Courtesy of NISSAN MOTOR CO., U.S.A.

Measure dimensions "K" and "L" and then calculate dimension "J".

Fig 2: Measuring Dimensions "K" And "L"
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Measure dimension "K".
  
  Fig 3: Measuring Dimension "K"
  Courtesy of NISSAN MOTOR CO., U.S.A.
2. Measure dimension "L".
3. Calculate dimension "J".
"J": Distance between oil pump fitting surface of transmission case and needle bearing mating surface of front sun gear.

J = K -L

Fig 4: Measuring Dimension "L"
Courtesy of NISSAN MOTOR CO., U.S.A.
Measure dimensions "M1 " and "M2 " and then calculate dimension "M".

Fig 5: Measuring Dimensions "M1 " And "M2 "
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Place bearing race and needle bearing on oil pump assembly.
  
  Fig 6: Placing Bearing Race And Needle Bearing On Oil Pump Assembly
  Courtesy of NISSAN MOTOR CO., U.S.A.
2. Measure dimension "M1 ".
  
  Fig 7: Measuring Dimension "M1 "
  Courtesy of NISSAN MOTOR CO., U.S.A.
3. Measure dimension "M2 ".
  
  Fig 8: Measuring Dimension "M2 "
  Courtesy of NISSAN MOTOR CO., U.S.A.
4. Calculate dimension "M".
"M": Distance between transmission case fitting surface of oil pump and needle bearing on oil pump.

M = M1 -M2

Fig 9: Calculating Dimension "M"
Courtesy of NISSAN MOTOR CO., U.S.A.
Adjust total end play "T1 ".
T1 = J -M

Total end play "T1 ": 0.25 - 0.55 mm (0.0098 - 0.0217 in)
- Select proper thickness of bearing race so that total end play is within specifications.
Fig 10: Adjusting Total End Play "T1 "
Courtesy of NISSAN MOTOR CO., U.S.A.

Bearing races: Refer to "BEARING RACE FOR ADJUSTING TOTAL END PLAY ".