LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> 2WD >> Transverse Link >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove tires from vehicle with a power tool.
  2. Remove undercover with a power tool.
  3. Remove the mounting nut on the upper side of stabilizer connecting rod with a power tool, and then remove stabilizer connecting rod from transverse link.
  4. Separate steering gear assembly and lower joint. Refer to "STEERING COLUMN ".
  5. Remove rack stay. Refer to , "COMPONENTS ".
  6. Remove the mounting nut and bolt on the lower side of shock absorber with a power tool, and then remove shock absorber from transverse link.
  7. Remove transverse link from steering knuckle. Refer to "REMOVAL AND INSTALLATION ".
  8. Set jack under front suspension member.
  9. Remove the mounting bolts of member bracket, and then remove member bracket from front suspension member with a power tool. Refer to , "COMPONENTS ".
  10. Remove the mounting nut and bolts of member stay, and then remove member stay from front suspension member and vehicle with a power tool.
  11. Remove the mounting nut of front suspension member with a power tool. Refer to , "COMPONENTS ".
  12. Gradually lower the suspension member to the position where transverse link mounting bolts is remove.
    CAUTION: Be careful not to lower it too far. (Do not overload the links)
  13. Remove mounting nut and bolts, and then remove transverse link from vehicle.
scientia non olet · About LEMON Manuals