LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (VQ35DE) - DTCS P1220 To P2A03 >> DTC P1572 ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    ASCD BRAKE SWITCH TERMINALS 1 AND 2

    Condition Continuity
    Brake pedal: Fully released. Should exist.
    Brake pedal: Slightly depressed. Should not exist.
  4. If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step  3 again.
Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
G04138860Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals