Turn Signal Input Inspection

1. CHECK TURN SIGNAL INPUT 

Check turn signal input "TURN SIGNAL" in "DATA MONITOR" mode with CONSULT-II.

"TURN SIGNAL" 

When lighting switch is in TURN RH position: RH 

When lighting switch is in TURN LH position: LH 

When hazard switch is turned ON: RH/LH 

Fig 1: CONSULT-II Display - Data Monitor

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

OK: Turn signal input is OK. Return to "SYMPTOM CHART ".

NG: Check turn signal and hazard warning lamps system, and repair or replace corresponding parts. Refer to "HOW TO PERFORM TROUBLE DIAGNOSES ".