LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2006 >> M35 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> Trouble Diagnosis >> Self-Diagnosis >> Erase Memory

Erase Memory

  1. Turn ignition switch OFF.
  2. Start engine and touch "START (NISSAN BASED VHCL)", "ABS", "SELF-DIAG RESULTS", "ERASE MEMORY" in order on the CONSULT-II screen to erase the diagnostic memory.

    If "ABS" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

    CAUTION: If the diagnostic memory is not erased, re-perform the operation from step 4.
  3. Perform self-diagnosis again, and make sure that diagnostic memory is erased.
  4. Drive vehicle at 30 km/h (19 MPH) or more for approximately 1 minute as the final inspection, and make sure that the ABS warning lamp, VDC OFF indicator lamp, SLIP indicator lamp and brake warning lamp turn off.
NOTE:
  • Brake warning lamp will turn on in case of parking brake operation (when switch is ON) or of brake fluid level switch operation (when brake fluid is insufficient).
  • VDC OFF switch should not stay "ON" position.
scientia non olet · About LEMON Manuals