Connection Confirmation
The input signals of steering angle sensor signal, reverse signal, and vehicle speed signal can be checked.
DIAGNOSIS ITEM AND VEHICLE STATUS REFERENCE
| Diagnosis item | Display | Vehicle status |
|---|---|---|
| Steering Angle Sensor | ON | It turns ON when the steering is turning with the ignition switch ON (Once it turns ON, it does not change during Connection Confirmation mode) |
| OFF | Turn ignition switch ACC It turns OFF when the steering is not turning with the ignition switch ON |
|
| - | Camera-connection recognition signal malfunction | |
| Reverse Sensor | ON | Selector lever in R position with ignition switch ON |
| OFF | Turn ignition switch ACC Selector lever in any position other than R with ignition switch ON |
|
| - | Camera-connection recognition signal malfunction | |
| Vehicle Speed Sensor | ON | When vehicle speed is 0 km/h or more with ignition switch ON |
| OFF | Turn ignition switch ACC When vehicle speed is 0 km/h with ignition switch ON |
|
| - | Camera-connection recognition signal malfunction |