NAVI Control Unit (With NAVI)
- It controls each unit of the system by the operation signal from the multifunction switch and sends the image signal of operating condition or vehicle information, etc. to the display unit.
- It receives the TEL input voice or the input voice at voice control from the microphone. It receives the received TEL voice, and then sends it to the audio unit.
- The gyro (angle speed sensor) and the DVD-ROM drive are built-in units that control the navigation functions.
- Signals are received from the gyro, the vehicle speed sensor, and the GPS antenna. Vehicle location is determined by combining this data with the data contained in the DVD-ROM map. Location information is shown on liquid crystal display panel.
Courtesy of NISSAN MOTOR CO., U.S.A.