Operation Procedure

1. Touch "DTC WORK SUPPORT" on "SELECT DIAG MODE" screen.
   Fig 1: Consult-II SELECT DIAG MODE Display Screen

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. Touch select item menu.
   Fig 2: CONSULT-II Diagnosis Function Display - Select Work Item

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Touch "START".
   Fig 3: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

   Courtesy of NISSAN MOTOR CO., U.S.A.
4. Perform driving test according to "DTC Confirmation Procedure" in "TROUBLE DIAGNOSIS FOR DTC".
   Fig 4: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

   Courtesy of NISSAN MOTOR CO., U.S.A.
   • When testing conditions are satisfied, CONSULT-II screen changes from "OUT OF CONDITION" to "TESTING"  .
     Fig 5: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

     Courtesy of NISSAN MOTOR CO., U.S.A.
5. Stop vehicle.
   Fig 6: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

   Courtesy of NISSAN MOTOR CO., U.S.A.
   • If "NG" appears on the screen, malfunction may exit. Go to " DIAGNOSTIC PROCEDURE  " 
     Fig 7: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

     Courtesy of NISSAN MOTOR CO., U.S.A.
6. Perform test drive to check gear shift feeling in accordance with instructions displayed.
7. Touch "YES" or "NO".
8. CONSULT-II procedure is ended.
   Fig 8: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

   Courtesy of NISSAN MOTOR CO., U.S.A.
   • If "NG" appears on the screen, a malfunction may exit. Go to " DIAGNOSTIC PROCEDURE  " 
     Fig 9: CONSULT-II Diagnosis Function Display - TCC Sol Function Check

     Courtesy of NISSAN MOTOR CO., U.S.A.

Display Items List