Total End Play

Measure clearance between front sun gear and bearing race for oil pump cover.
Select proper thickness of bearing race so that end play is within specifications.

Fig 1: Measuring Clearance Between Front Sun Gear And Bearing Race For Oil Pump Cover
Courtesy of NISSAN MOTOR CO., U.S.A.

Measure dimensions "K" and "L" and then calculate dimension "J".

Fig 2: Measuring Dimensions
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Measure dimension "K".
  
  Fig 3: Measuring Dimension Of K
  Courtesy of NISSAN MOTOR CO., U.S.A.
2. Measure dimension "L".
3. Calculate dimension "J".
  "J" : Distance between oil pump fitting surface of transmission case and needle bearing mating surface of front sun gear.
  
  J = K - L
  
  Fig 4: Measuring Dimension Of L
  Courtesy of NISSAN MOTOR CO., U.S.A.
Measure dimensions "M1" and "M2" and then calculate dimension "M".

Fig 5: Measuring Dimensions M1 And M2
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Place bearing race and needle bearing on oil pump assembly.
  
  Fig 6: Placing Bearing Race And Needle Bearing On Oil Pump Assembly
  Courtesy of NISSAN MOTOR CO., U.S.A.
2. Measure dimension "M1".
  
  Fig 7: Measuring Dimension Of M1
  Courtesy of NISSAN MOTOR CO., U.S.A.
3. Measure dimension "M2".
  
  Fig 8: Measuring Dimension Of M2
  Courtesy of NISSAN MOTOR CO., U.S.A.
4. Calculate dimension "M".
  "M" : Distance between transmission case fitting surface of oil pump and needle bearing on oil pump.
  
  M = M1 - M2
  
  Fig 9: Measuring Dimension Of M
  Courtesy of NISSAN MOTOR CO., U.S.A.
Adjust total end play "T1 ".
T1 = J - M

Total end play "T1 " : 0.25 - 0.55 mm (0.0098 - 0.0217 in)
- Select proper thickness of bearing race so that total end play is within specifications. Refer to " " for bearing race selection.
  
  Fig 10: Adjusting Total End Play
  Courtesy of NISSAN MOTOR CO., U.S.A.