Remote Control Entry Function Malfunction
TROUBLE DIAGNOSIS SYMPTOM CHART
| Symptom | Diagnoses service procedure |
|---|---|
| Door lock/unlock does not operate (other functions normal) when Intelligent Key remote controller button is operated. | 1. Check door lock/unlock setting. See WORK SUPPORT |
| 2. INTELLIGENT KEY BATTERY INSPECTION | |
| 3. CHECK DOOR UNLOCK SENSOR | |
| 4. CHECK DOOR SWITCH | |
| 5. Replace BCM. See REMOVAL AND INSTALLATION OF BCM | |
| 6. Replace Intelligent Key unit. See REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| Driver side selective door unlock function does not operate, when Intelligent Key remote controller button is operated. (All other remote control entry function is OK.) | 1. Check selective door unlock setting. See WORK SUPPORT |
| 2. Replace BCM. See REMOVAL AND INSTALLATION OF BCM | |
| 3. Replace Intelligent Key unit. See REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| Panic alarm (horn and headlamp) do not activate, when panic alarm button is continuously pressed. (All other remote control entry function is OK.) | 1. Check panic alarm mode. See WORK SUPPORT |
| 2. CHECK HEADLAMP FUNCTION | |
| 3. CHECK HORN FUNCTION | |
| 4. CHECK IPDM E/R OPERATION | |
| 5. CHECK KEY SWITCH (INTELLIGENT KEY UNIT INPUT) | |
| 6. CHECK IGNITION KNOB SWITCH | |
| 7. Replace Intelligent Key unit. See REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| Hazard lamps do not flash during door lock operation using Intelligent Key remote controller button operated. (Turn signal lamp operation is OK.) (All other remote control entry function is OK.) |
1. Check key reminder setting. See WORK SUPPORT |
| 2. Replace BCM. See REMOVAL AND INSTALLATION OF BCM | |
| 3. Replace Intelligent Key unit. See REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT | |
| Hazard lamps do not flash during door lock operation using Intelligent Key remote controller button operated. (Turn signal lamps do not operate.) | CHECK HAZARD FUNCTION |
| Intelligent Key warning buzzer does not sound during door lock/unlock operation using Intelligent Key remote controller button is operated. (All other remote control entry function is OK.) | 1. Check if the operation confirmation Intelligent Key warning buzzer was cancelled by the CONSULT-II settings change function. See WORK SUPPORT |
| 2. CHECK INTELLIGENT KEY WARNING BUZZER | |
| 3. Replace Intelligent Key unit. See REMOVAL AND INSTALLATION OF INTELLIGENT KEY UNIT |