Check CAN Communication System Inspection

SELF-DIAGNOSTIC RESULT CHECK

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.

With CONSULT-II

Connect CONSULT-II, and turn ignition switch ON.
Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
Touch "SELF-DIAG RESULTS" on "SELECT DIAG MODE" screen.

Check display content in self-diagnostic results.

CONSULT-II DISPLAY ITEM

CONSULT-II display item	DTC code
NO DTC IS DETECTED	-
CAN COMM	U1000

Contents displayed

NO DTC IS DETECTED : INSPECTION END
CAN COMM [U1000] : After printing the monitor items, GO TO "PRECAUTIONS WHEN USING CONSULT-II ".