Terminals and Reference Value for LDW Camera Unit
TERMINALS REFERENCE VALUE CHART
| Terminal No. | Wire Color | Item | Condition | Reference Value (Approx. [V]) | ||
|---|---|---|---|---|---|---|
| Ignition switch | Operation or condition | |||||
| 1 | B/R | Ignition power supply | ON | - | Battery voltage | |
| 3 | R/W | LDW chime | ON | LDW chime | Activated* | 0 |
| Not activated | 12 | |||||
| 4 | Y | System ON indicator | ON | LDW system | ON | 0 |
| OFF | 12 | |||||
| 5 | R | CAN-L | - | - | - | |
| 6 | B | Ground | ON | - | 0 | |
| 8 | G/W | LDW indicator lamp | ON | LDW indicator lamp | Illuminated* | 0 |
| Turned OFF | 12 | |||||
| 9 | G | LDW switch | ON | LDW switch | Pressed | 0 |
| Released | 5 | |||||
| 10 | L | CAN-H | - | - | - | |
| 11 | - | Shield | - | - | - | |
| 12 | B | Ground | ON | - | 0 | |
NOTE:
*: Perform "ACTIVE TEST" with CONSULT-II. Refer to
"ACTIVE TEST ".