System Description: Notes
NOTE:
- When handling seat, be extremely careful not to scratch heating unit
- To replace heating unit, seat trim and pad should be separated.
- Do not use any organic solvent, such as thinner, benzene, alcohol, etc. to clean trims.
Power is all times supplied
- Through 40A fusible link [Letter H, located in the fuse block (J/B)],
- To rear power seat control unit LH and rear power seat control unit RH terminal 2.
With the ignition switch to ON or START position, power is supplied
- Through 20A fuse [No. 81, located in the fuse block (J/B)]
- To front heated seat switch (driver side, passenger side) terminal 1, and
- To rear power seat control unit LH, RH terminal 44,
- To rear power seat switch (heater switch) terminal 1