LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> Transmission >> Automatic Transmission - Sedan >> Shift Control System >> Adjustment of A/T Position >> AWD Models

AWD Models

  1. Loosen nut of control rod.
  2. Place PNP switch and selector lever in "P" position.
  3. While pressing lower lever toward rear of vehicle (in P position direction), tighten nut to specified torque. Refer to "CONTROL DEVICE COMPONENTS (AWD MODELS) ".
    CAUTION: Do not push the bracket.
    Fig 1: Loosening Nut Of Control Rod
    G02349629Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals