LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 x >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Sedan >> DTC P1211: TCS Control Unit >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 60 seconds.
  4. If 1st trip DTC is detected, go to "Diagnostic Procedure "
    Fig 1: Identifying Data Monitor Display On Consult-II Screen
    G02348813Courtesy of NISSAN MOTOR CO., U.S.A.