Power Door Lock Operation
BCM locks all doors with input of LOCK signal from remote keyless entry receiver.
When an UNLOCK signal is sent from remote keyless entry receiver once, driver's door is unlocked.
Then, if an UNLOCK signal is sent from remote keyless entry receiver again within 5 seconds, all other doors are unlocked.
NOTE:
Remote keyless entry receiver receives key fob signal from key fob.
Power door lock operation mode can be changed using "DOOR LOCK-UNLOCK SET" mode in "WORK SUPPORT" of "POWER DOOR LOCK SYSTEM".
Refer to "Work Support ".
Power door lock operation mode can be changed using "DOOR LOCK-UNLOCK SET" mode in "WORK SUPPORT" of "POWER DOOR LOCK SYSTEM".
Refer to "Work Support ".