LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 Base, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Sedan >> DTC P0102, P0103: MAF Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0103 >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Wait at least 5 seconds.
  4. If DTC is detected, go to "Diagnostic Procedure ".

    If DTC is not detected, go to next step.

  5. Start engine and wait at least 5 seconds.
  6. If DTC is detected, go to "Diagnostic Procedure ".
    Fig 1: Selecting "DATA MONITOR" Mode
    G02348360Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals