LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Coupe >> DTC P1572: ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    ASCD BRAKE SWITCH CONTINUITY

    Condition Continuity
    Brake pedal: Fully released. Should exist.
    Brake pedal: Slightly depressed. Should not exist.

    If NG, adjust ASCD brake switch installation, refer to BRAKE PEDAL , and perform step  3 again.

    Fig 1: Checking ASCD Brake Switch Continuity
    G02334085Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals