LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 Base, 2D Coupe, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - Coupe >> DTC P0102, P0103: MAF Sensor >> DTC Confirmation Procedure >> Procedure For DTC P0102 >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 5 seconds.
  4. If DTC is detected, go to Diagnostic Procedure .
    Fig 1: Selecting "DATA MONITOR" Mode (DTC P0102)
    G02333409Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals