LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> G35 Base, 2D Coupe, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Control System - Sedan) >> DTC P0101: MAF Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II

With CONSULT-II

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and warm it up to normal operating temperature.
  4. Run engine for at least 10 seconds at idle speed.
  5. If 1st trip DTC is detected, go to "Diagnostic Procedure "
    Fig 1: Procedure For Malfunction A
    G02348345Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals