Total End Play

Measure clearance between front sun gear and bearing race for oil pump cover.
Select proper thickness of bearing race so that end play is within specifications.

Fig 1: Measuring Clearance Between Front Sun Gear And Bearing Race For Oil Pump Cover
Courtesy of NISSAN MOTOR CO., U.S.A.

Measure dimensions "K" and "L" and then calculate dimension "J".

Fig 2: Measuring Dimensions
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Measure dimension "K".
  
  Fig 3: Measure Dimension - K
  Courtesy of NISSAN MOTOR CO., U.S.A.
2. Measure dimension "L".
3. Calculate dimension "J".
  1. "J": Distance between oil pump fitting surface of transmission case and needle bearing mating surface of front sun gear.
    1. J = K - L
Fig 4: Measure Dimension - l
Courtesy of NISSAN MOTOR CO., U.S.A.
Measure dimensions "M1 " and "M2 " and then calculate dimension "M".

Fig 5: Measure Dimension - M1
Courtesy of NISSAN MOTOR CO., U.S.A.
1. Place bearing race and needle bearing on oil pump assembly.
  
  Fig 6: Placing Bearing Race And Needle Bearing On Oil Pump Assembly
  Courtesy of NISSAN MOTOR CO., U.S.A.
2. Measure dimension "M1 ".
  
  Fig 7: Measure Dimension - M1
  Courtesy of NISSAN MOTOR CO., U.S.A.
3. Measure dimension "M2 ".
  
  Fig 8: Measure Dimension - M2
  Courtesy of NISSAN MOTOR CO., U.S.A.
4. Calculate dimension "M".
  1. "M": Distance between transmission case fitting surface of oil pump and needle bearing on oil pump.
    1. M = M1 - M2
Fig 9: Calculate Dimension - M
Courtesy of NISSAN MOTOR CO., U.S.A.
Adjust total end play "T1 ".
1. T1 = J - M
2. Total end play "T1 ":
  1. 0.25 - 0.55 mm (0.0098 - 0.0217 in)
- Select proper thickness of bearing race so that total end play is within specifications.
  1. Bearing races:
    1. Refer to "BEARING RACE FOR ADJUSTING TOTAL END PLAY ".
Fig 10: Adjusting Total End Play - T1
Courtesy of NISSAN MOTOR CO., U.S.A.