All Warnings Are Not Operated

Select "BUZZER" on CONSULT-II, and perform "LIGHT WARN ALM", "IGN KEY WARN ALM" or "SEAT BELT WARN TEST" of "ACTIVE TEST".

Does chime sound? 

1. YES: Replace BCM. Refer to "REMOVAL AND INSTALLATION OF BCM ".
2. NO: GO TO 2.

Fig 1: CONSULT-II Diagnosis Function Display (4 Of 6)

Courtesy of NISSAN MOTOR CO., U.S.A.

Select "METER A/C AMP" on CONSULT-II. Operate switches meet the requirements to sounds warning chime with "BUZZER" of "DATA MONITOR" and check operation status.

1. "BUZZER" 
2. When meet the requirements to sounds warning chime: ON 
3. Except above: OFF 

OK or NG 

1. OK: Replace combination meter.
2. NG: Replace BCM. Refer to "REMOVAL AND INSTALLATION OF BCM ".

Fig 2: CONSULT-II Diagnosis Function Display (5 Of 6)

Courtesy of NISSAN MOTOR CO., U.S.A.