Preliminary Inspection

Are camera lens and windshield contaminated with foreign materials? 

1. YES: Clean camera lens and windshield.
2. NO: GO TO 2.

Check camera unit installation condition (installation position, properly tightened, a bent bracket).

OK or NG 

1. OK: GO TO 3.
2. NG: Install camera unit properly, and adjust camera aiming. Refer to "CAMERA AIMING ADJUSTMENT ".

Check vehicle height. Refer to "SERVICE DATA ".

Is vehicle height appropriate? 

1. OK: GO TO 4.
2. NG: Repair vehicle to appropriate height.

Perform the LDW camera unit self-diagnosis. Refer to "CONSULT-II FUNCTION (LDW) ".

Self-diagnostic results content 

1. No malfunction detected:GO TO 5.
2. Malfunction detected:Check applicable parts, and repair or replace corresponding parts.

Check combination meter function.

Do speedometer and turn signal indicator normal function? 

1. YES: INSPECTION END
2. NO: Check combination meter. Refer to "TROUBLE DIAGNOSIS ".