Check ACC Switch

With CONSULT-II 

Check ACC switch ("ACC ON SW") in "DATA MONITOR" mode with CONSULT-II.

Fig 1: Monitor Item Condition

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Displaying ("ACC ON SW") In "DATA MONITOR" Mode

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II 

Check voltage between BCM connector and ground.

Fig 3: Connector Terminal Reference Chart

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Checking Voltage Between BCM Connector And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK : ACC switch is OK.
2. NG : Check the following.
   • 10A fuse [No. 6, located in fuse block (J/B)]
   • Harness for open or short between BCM and fuse.