Basic Operation

Turn ignition knob to LOCK position.
Connect CONSULT-II CONVERTER and CONSULT-II to data link connector.

Fig 1: Identifying Data Link Connector
Courtesy of NISSAN MOTOR CO., U.S.A.
Use mechanical key to turn ignition switch to ON.
Touch "START (NISSAN BASED VHCL)".

Fig 2: Displaying "START (NISSAN BASED VHCL)" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "INTELLIGENT KEY" on "SELECT SYSTEM" screen.
- If "INTELLIGENT KEY" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".
Fig 3: Displaying "INTELLIGENT KEY" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Select diagnosis mode. "WORK SUPPORT", "SELF-DIAG RESULTS", "DATA MONITOR", "ACTIVE TEST" and "ECU PART NUMBER" are available.

Fig 4: Displaying "WORK SUPPORT" Mode
Courtesy of NISSAN MOTOR CO., U.S.A.