LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2005 >> FX35 AWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> BCM (Body Control Module) >> Removal and Installation of BCM >> Removal

Removal and Installation of BCM: Removal

  1. Remove the dash side finisher (LH). Refer to "BODY SIDE TRIM " in "Exterior/Interior."
  2. Disconnect BCM connector.
  3. Remove bracket mounting screws (3) to remove BCM and fuse block with bracket.
    Fig 1: Identifying Bracket Mounting Screws
    G02359654Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Raise the pawl of fuse block and remove bracket from fuse block to remove BCM.
    Fig 2: Removing Bracket From Fuse Block
    G02359655Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals