System Description: Notes

NOTE:

When handling seat, be extremely careful not to scratch heating unit
To replace heating unit, seat trim and pad should be separated.
Do not use any organic solvent, such as thinner, benzene, alcohol, etc. to clean trims.

Power is all times supplied

Through 40A fusible link [Letter H, located in the fuse block (J/B)],
To rear power seat control unit LH and rear power seat control unit RH terminal 2.
With the ignition switch to ON or START position, power is supplied
Through 20A fuse [No. 81, located in the fuse block (J/B) ]
To front heated seat switch (driver side, passenger side) terminal 1, and
To rear power seat control unit LH, RH terminal 44,
To rear power seat switch (heater switch) terminal 1