LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> I35 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Repair For Component Parts >> Band Servo Piston Assembly >> Assembly

Band Servo Piston Assembly: Assembly

  1. Install D-rings to servo piston retainer.
    • Apply ATF to D-rings. 
    • Pay attention to position of each O-ring. 
    Fig 1: Installing D-Rings To Servo Piston Retainer
    G00792906Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Install band servo piston stem, band servo thrust washer, O/D servo return spring and spring retainer to band servo piston.
    Fig 2: Installing Band Servo Piston Stem To Band Servo Piston
    G00792907Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Place piston stem end on a wooden block. While pushing servo piston spring retainer down, install E-ring.
    Fig 3: Installing E-Ring Pushing Servo Piston Spring Retainer
    G00792908Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Install O-rings to servo piston retainer.
    • Apply ATF to O-rings. 
    • Pay attention to position of each O-ring. 
    Fig 4: Installing O-Rings To Servo Piston Retainer
    G00792909Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Install band servo piston assembly to servo piston retainer by pushing it inward.
    Fig 5: Installing Band Servo Piston Assembly To Servo Piston Retainer
    G00792910Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Install D-ring to O/D servo piston.
    • Apply ATF to D-ring. 
    Fig 6: Installing D-Ring To O/D Servo Piston
    G00792911Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Install O-rings to O/D servo piston retainer.
    • Apply ATF to O-rings. 
    • Pay attention to position of each O-ring. 
    Fig 7: Installing O-Rings To O/D Servo Piston Retainer
    G00792912Courtesy of NISSAN MOTOR CO., U.S.A.
  8. Install O/D servo piston to O/D servo piston retainer.
    Fig 8: Installing O/D Servo Piston To O/D Servo Piston Retainer
    G00792913Courtesy of NISSAN MOTOR CO., U.S.A.
  9. Install band servo piston assembly and 2nd servo return spring to transmission case.
    • Apply ATF to O-ring of band servo piston and transmission case. 
    Fig 9: Installing Band Servo Piston Assembly And 2nd Servo Return Spring
    G00792914Courtesy of NISSAN MOTOR CO., U.S.A.
  10. Install O/D servo piston assembly to transmission case.
    • Apply ATF to O-ring of band servo piston and transmission case. 
    Fig 10: Installing O/D Servo Piston Assembly
    G00792915Courtesy of NISSAN MOTOR CO., U.S.A.
  11. Install O/D servo piston retainer to transmission case. Refer to BAND SERVO PISTON ASSEMBLY .
Fig 11: Installing O/D Servo Piston Retainer
G00792916Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals