LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> I35 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> On Board Diagnostic System Description >> Malfunction Indicator Lamp (Mil) >> How To Switch Diagnostic Test Mode >> How To Erase Diagnostic Test Mode II (Self-Diagnostic Results)

How To Erase Diagnostic Test Mode II (Self-Diagnostic Results)

  1. Set ECM in Diagnostic Test Mode II (Self-diagnostic results). Refer to How to Set Diagnostic Test Mode II (Self-diagnostic Results).
  2. Fully depress the accelerator pedal and keep it for more than 10 seconds. The emission-related diagnostic information has been erased from the backup memory in the ECM.
  3. Fully release the accelerator pedal, and confirm the DTC 0000 is displayed.
scientia non olet · About LEMON Manuals