LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> Transmission >> Automatic Trans >> 2004.5 - Automatic Transaxle - Sedan >> Key Interlock Cable >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Unlock slider by squeezing lock tabs on slider from adjuster holder.
  2. Remove casing cap from bracket of control device assembly and remove interlock rod from cable.
    Fig 1: Removing Casing Cap From Bracket Of Control Device Assembly
    G03326071Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove holder from key cylinder and remove key interlock cable.
    Fig 2: Removing Holder From Key Cylinder
    G03326072Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals