LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2004 >> G35 x >> Repair and Diagnosis >> External Pages >> Different car >> Section 1848 (Front Axle) >> Front Drive Shaft >> Removal and Installation >> Installation >> Wheel Side

Wheel Side

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the drive shaft into the knuckle.
  2. Install the wheel bearing lock nut and tighten to specification. Refer to "REMOVAL AND INSTALLATION ".
  3. Install a new cotter pin to secure the wheel bearing lock nut.
    CAUTION: Always use a new cotter pin for installation.
  4. Installation of the remaining components in the reverse order of removal.
scientia non olet · About LEMON Manuals